An electrostatic precipitator that maintains its effectiveness over time. Designed for real-world operation—with easy access, operational monitoring, and quick cleaning capabilities. A 100% Polish product, designed with real-world operating conditions in mind.
Non-invasive installation
Unlike many standard solutions, the electrofilter maintains high efficiency due to easy servicing and simple cleaning. The advanced controller continuously monitors the voltage and current of the ESP module, ensuring stable operating conditions. This guarantees consistent filtration performance and reliability even under intensive use.
Service without dismantling the system
Easy maintenance of the electrostatic filter, thanks to the removable sediment cartridge, ensures quick cleaning of the electrodes and helps maintain consistently high exhaust gas filtration efficiency.
Removable electrostatic precipitator module
Full service access from the boiler room level, without working on the chimney, with automatic HV power disconnection upon opening the door – quick handling and safe servicing of the device.
2.In the central part of the device, corona electrodes generate a controlled high-voltage electrostatic field. Within this area, gas molecules become ionized, and the dust particles contained in the flue gases receive an electric charge.
4.After passing through the electrostatic cleaning zone, the flue gases leave the electrofilter practically free of suspended dust. The result is significantly reduced emissions from the chimney, cleaner air, and a more environmentally friendly operation of the installation.
3.Charged dust particles are attracted to the collecting electrodes, where they settle on their surface. This ensures that even very fine fractions of dust, which would normally enter the atmosphere, are effectively retained.
1.Flue gases from the boiler enter the electrofilter through the inlet duct.
Operating principle
ESP-MOD-S
Advanced systems for reducing particulate emissions
Comparison of Solutions
In many market solutions, the problem is not the lack of technology, but the lack of a real possibility to operate it. The ESP-MOD-S electrofilter has been designed so that the user can easily and regularly service it, which directly translates into actual filtration efficiency.
Area
- Service access
- Cleaning
- Filter module
- Service time
- Service regularity
- Stability of efficiency
- Operation control
- Safety switch
- Safety
- System integration
Common Chimney Solutions
- access through the chimney / on the roof
- difficult, often postponed
- no access or limited access
- long, requiring preparation
- often overlooked by the user
- fall along with dirt
- limited or none
- none
- lack of security integration
- rarely available
Electrostatic precipitator ESP-MOD-S
- from the boiler room level
- quick, without disassembly
- removable ESP insert
- a few minutes
- practical in reality
- maintained over time
- controller + parameter monitoring
- as standard
- CO sensor + diagnostics
- Modbus RTU
Durableand simplifieddesign
- no classic screwed elementsin the ESP module (screws, sleeves, spacers)
- high mechanical stabilityand geometric stability of the electrode system
- reduction of loosening riskand misalignment during operation
Construction
of the device
1.Service door with integrated HV power supply system and intelligent controller.
2.Removable ESP working module
3.Inlet nozzle
4. Housing with a flow chamber
5. Outlet pipe
High efficiencyof separation
Unlike typical tubular electrofilters, where the settling surface is the inner wall of the tube, the Elektrodynamika electrofilter uses a system of multiple flat settling electrodes in the ESP module.
Maximum surfacefor settling
Multiplied settling surface for the same height of the device – each electrode works on both sides, significantly increasing the effective surface area for particle collection.
Reliabilityin operation
A reduced number of structural elements means greater geometric stability, lower risk of electrode system misalignment, and repeatable operating parameters throughout the device's lifecycle.
Original Geometry
electrode
intensive, multipoint ionization due to comb geometry uniform electric field throughout the flue gas flow volume high separation efficiency, even for the finest dust fractions
fuel variability:wood pellets A1 and A2, energy plant pellets, miscanthus, sunflower husk, straw
dynamic changes in boiler load
Stable operation under real conditions
The device has been designed for real operation, not test conditions.
Maintains high efficiency even with variable and difficult operating parameters of the installation:
unstable flue gas temperature
One solution
Many installation options
Intelligent controller
with display
The electrofilter is equipped with an advanced controller with a built-in display, providing full control over the operation of the device and constant access to key operational parameters. The controller not only presents data but actively supervises the operation of the electrofilter, controlling the voltage and current parameters of the ESP module to maintain stable operating conditions and consistent filtration efficiency.
Intuitive interface
The screen displays the most important information:
- current device status: operation / alarm / contamination (cleaning required)
- operating voltage of the electrofilter module (kV)
- status and diagnostic messages
Full control
- flue gas temperature
- operating current of the ESP module (mA)
- operating voltage of the ESP module (kV)
Readable operation
- simple operation
- using buttons (+ / -)
- quick access to operating parameters
- clear interface
Automatic information about the need for cleaning
The integrated monitoring system of the electrofilter analyzes its condition and informs the user about the need for cleaning, ensuring that:
- high filtration efficiency is maintained
- the risk of performance drop is eliminated
- the operation of the device is intuitive and predictable
Communication and system integration
The electrofilter controller has built-in Modbus RTU (RS485) communication, which enables:
- integration with building automation systems (BMS)
- remote monitoring of the device's operation
- reading parameters and diagnostics in master systems
Integrated sensorcarbon monoxide (CO)
The device is equipped with a built-in carbon monoxide (CO) sensor that continuously monitors the concentration of carbon monoxide in the vicinity of the installation.
In case of detecting elevated CO levels:
- an immediate alarm is generated on the controller along with an audible signal
- the user receives clear information about the threat
- integration of the alarm signal with external systems is possible
ESP Systems for Solid Fuel Boiler Manufacturerse
The technology we will integrate with EVERY boiler
Electrodynamics offers full integration of ESP electrofilters with solid fuel boilers – from residential to commercial. We provide not just a module, but a complete OEM solution that becomes an integral part of your device.
Comprehensive
implementation package
- Custom ESP geometry design tailored to the specific construction of the boiler heat exchanger.
- A complete ecosystem including the ESP module, HV power supply, dedicated electronics, and full parameterization.
- Full technical support and assistance with certification, emission optimization, and laboratory testing.
- Patent security with access to technology with broad protection in the EU market (Unitary Patent).
- Automation of intelligent electrode cleaning systems, ensuring constant effectiveness of the ESP module over time.
Emission standards
under control
The tightening European emission standards are forcing boiler manufacturers to quickly adapt their technology. By integrating our ESP systems, your devices gain the necessary emission buffer, allowing you not only to confidently meet upcoming legal requirements but also to secure the market position of your products in the long term. Our solution, as an integral part of the boiler's construction, ensures high efficiency in fine dust filtration under all operating conditions, not just during laboratory tests. We support manufacturers at every stage, from design to final certification, turning regulatory pressure into a real competitive advantage for your brand.